Gutter Erase
Image Shift
Select the features required.
Load the document. Ensure
that the documents are in the
same orientation as the
media loaded in the paper
trays.
Select [Added Features].
Select [Image Shift] and the
option required.
Select [Save] and [Save]
again.
Enter the quantity and select
[Start].
Auto Center
Margin Shift
Xerox Document Centre 440/432/430/426/425/420 User Guide
erases up to 2 in from the gutter area down the center of a
bound document. When the 1 and 2 option is selected any
amount from 0 - 2 in can be entered.
Use this feature to change the position of the image on a page.
Image Shift options
Off
the feature is not available.
automatically shifts the image to the center of the paper.
copies the image to a specific area. Unless the new location is
specified, the output will be displayed on the page just as it is
on the document.
- Side 1: (the default setting) shifts the image to the left or
right, up or down for the first page of the document being
copied. The image can be shifted up to 2 in.
Page 3-27