Table of Contents
Advertisement
Internal Auditron (DC426/420)
Quick Pathway
Select
Access]
Control Panel
Enter Owner PIN - see
NOTE
Select [Auditron
Setups]
Select [Internal
Auditron].
Select a button
Make changes as
required
Select [Save] to
continue.
Access Auditron Setups.
Select [Internal Auditron].
Page 11-76
Internal Auditron setups on the DC426/420 models cover the
following topics:
1. Service Access Setup—to set up the Auditron for one or
more services.
on the
2. Account Setup—to set up the Auditron accounts, delete
accounts and to set counter limits for each account.
3. Job Completion Setup—to set up how the machine should
behave when an account reaches its account limit.
NOTE:
PINs have not yet been assigned.
Service Access Setup (DC426/420)
This setup enables the Auditron services to be enabled or
disabled as required. One or more services can be selected.
The default password is #22222 which may be used if
Xerox Document Centre 440/432/430/426/425/420 User Guide
Advertisement
Table of Contents
