Table of Contents
Advertisement
Holding the cartridge by its
handle, slide it into the frame
in the machine. Let go of the
handle as you slide the Copy/
Print Cartridge all the way to
the back of the frame. It must
click into place.
Pull the coloured tab to
remove the sealing tape from
the cartridge. It is located on
the front of the cartridge.
Close the Left Front Cover.
NOTE: The Left Front Cover
will not close if the cartridge is
not completely in place.
Close the Upper Left Cover.
IF FITTED
Close the Duplex Module.
Slide the Finisher and High
Capacity Feeder back in to
place.
Page 12-10
CAUTION: To avoid spills, do not remove the sealing tape
until the Copy/Print Cartridge is completely in place.
Xerox Document Centre 440/432/430/426/425/420 User Guide
Advertisement
Table of Contents
