Manual Send; Delayed Start - Xerox WorkCentre Pro 575 Advanced Features Manual

Transmitting Documents

Manual Send

Delayed Start

5-8
Refer to "Manual Dial" in Chapter 4 "Dialing Methods".
Transmitting a document at a programmed time is known as a
Delayed Start. You can set up a job to begin one month in advance.
This feature permits cost savings by scheduling jobs during periods
when telephone rates are lower.
To set up a Delayed Start:
1. Load the document face down in the Document Support.
2. Select the desired Resolution and Contrast .
3. Press:
Menu
4. Use the Numeric Keypad and the arrow keys to enter the time
and date you want the job to start, then press Enter.
Note: If the 12-hour format is selected, use the arrow keys to
select am/pm. DD represents the day of the month. If a
number above 31 is entered, the job is started on the first
day of the following month.
Note: You can select another option for this job. Refer to the
selected option for the procedure.
5. Using one of the dialing methods, enter the fax number and press
Start.
The document is scanned into memory and is transmitted at the
designated time.
Send later
[02:23pm 31]
WorkCentre Pro 555/575