Operation Log - Omron G9SP-N20S Operation Manuals

Monitoring Devices

10-1-4 Operation Log

Stored Operations
Stored operation
Power ON or emulating cycling power
Out of box reset
Download
Lock/Unlock
Change Mode
Start/stop of force mode
Change device password
Clear error log
Backup to Memory Cassette
Restore from Memory Cassette
Operations that have been performed in the G9SP-series Controller can be
checked in the operation log. Up to 10 operations are stored in the nonvolatile
memory in the G9SP-series Controller. They are still retained even when the
power is turned OFF and back ON. When more than 10 records are stored,
the oldest records are deleted.
Displays the unit ON time when the operation was executed.
Clears all operations from the operation log.
The operation log is not updated while the Operation Log
List Tab Page is displayed. Always click the Update Button.
The following operations are stored in the operation log list.
The G9SP-series Controller was turned ON or reset from the G9SP
Configurator.
The G9SP-series Controller was reset to the default settings.
The configuration data was downloaded from the G9SP Configurator.
The configuration was locked or unlocked from the G9SP Configurator.
The operating mode was changed from the G9SP Configurator.
Force Mode was started or ended from the G9SP Configurator.
The Device Password was changed from the G9SP Configurator.
The error log was cleared from the G9SP Configurator.
The configuration data was backed up from the G9SP-series Controller
to the Memory Cassette.
Configuration data was restored from the Memory Cassette to the
G9SP-series Controller.
Precautions for Correct Use
Only operations that are completed successfully are saved in the operation
log list.
Display the operation.
Used to save the operation log in a CSV-format file.
Description
Section 10-1
Newer
Older
151