Operator Devices Which Can Be Connected - Siemens SIMADYN D Manual

Communications configuring
3.19.2.5

Operator devices which can be connected

3-228
You can configure the following function blocks for additional functions:
• Function block CBRFAW
To receive the alarms from a COMBOARD
• CRV
The receive block distributes values from a data interface to the block
inputs of function blocks of the same CPU.
Only max. 16 PZD words can be received and sent using a
COMBOARD (e.g. CBP2).
• CTV
The function block only acquires and sends block output values from
the CPU function blocks, on which it is configured.
You can use the "DRIVE ES" or "DRIVE Monitor" configuring software to
parameterize the FM 458 application module
System- and communication configuring D7-SYS - SIMADYN D
Edition 12.2003