Siemens SIMADYN D Manual page 218

System- and communication configuring

Hide thumbs Also See for SIMADYN D:

Table of Contents

Lefthand margin

Configuring example: Subrack 1

System- and communication configuring D7-SYS - SIMADYN D

Edition 12.2003

(In this case, CS7 is called "D06CS7", communications module SS4 is

inserted at the 2nd connector).

The data entries at inputs AT, AR of CTV/CRV must match those on

subrack 1, otherwise data will not be able to be transferred.

The DUST1 central coupling block as well as 1 transmit- and 1 receive

block are configured on CPU 3 of subrack 2. (in this case, CS7 is called

"D10CS7", communications module SS4 is inserted at connector X03).

Address stage 1 must be the same for blocks which communicate with

one another:

• Subrack 1, transmitter=subrack 2, receiver=100

• Subrack 1, receiver=subrack 2, transmitter=200

Communications configuring

Righthand margin

Show Quick Links

Table of Contents