Siemens SIMADYN D Manual page 429

System- and communication configuring
Hide thumbs Also See for SIMADYN D:
Table of Contents

Advertisement

System- and communication configuring D7-SYS - SIMADYN D
Edition 03.2001
in STRUC V.4.x
Installing parallel to older
versions
Loading the data medium
init - machine initialization
print - configuring the
printer
acl - setting access
authorization
lang - setting the language Not necessary. You can change the language of
burn - programmer gets to
know the operating system
Installing software for the
programmer
Installing the user STRUC
G
Table 4-18
Comparison of the installation instructions
Changeover from STRUC V4.x to D7-SYS
in D7-SYS
Not possible.
Only one version of STEP7 (and the option
packages for STEP7) can be installed on a PC.
Insert the software medium (CD-ROM or floppy
disk No. 1) in the drive ...
... and start the "Setup" application (in directory
"disk1" of the CD-ROM or in the root directory of
the floppy disk).
The "Setup" installation program guides you
through the installation step-by-step. Please
observe the product information supplied with the
data medium.
Not necessary, all (graphics-capable) printers are
available, which you installed under
Windows 95/NT, under STEP7 (refer above).
Not required;
the user interface from STEP7 in the SIMATIC
Manager at any time (menu command Extras >
Settings, Register side "Language").
Not necessary. To load memory modules offline in
the CFC, all of the installed PCMCIA slots are
available.
Not necessary. The required drivers are installed
with the automatic hardware identification function
of Windows 95/NT.
Drivers for many commercially available PCMCIA
cards are already included in the scope of supply of
Windows 95/NT. Drivers for other devices can be
obtained from the appropriate suppliers. The
"PCMCIA assistant" of Windows 95/NT will help
you install the necessary drivers for the PCMCIA
slots.
For further information, please use the help infos
for Windows 95/NT under the subjects "Hardware,
setting-up" and "PCMCIA, activating the support
for".
Not necessary. The installed configuring tools are
available at this PC for all users.
4-23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D7-sys

Table of Contents