Siemens SIMADYN D Manual page 382

Hardware
3.27.2 Configuring SIMADYN D
General
information
3.27.2.1 Selecting the components in HWConfig
System- and communication configuring D7-SYS - SIMADYN D
Edition 12.2003
• Output of alarm messages including acknowledgment
• Interrogating the function keyboard
• Updating date and time
The following equipment and components are selected and located as
follows for the configuration example:
6
SIEMENS
SIMATIC OP7
F1 F2 F3 F4
K1 K2 K3 K4
7 8 9
ESC
4 5 6
ACK
1 2 3
INS
. 0 +/- SHIFT HELP ENTER
DEL
1
Subrack SRT6
2 Processor module PM5
3 Program memory submodule MS5
Communications module CS7
4
Fig. 3-116 Setting-up the configuring example
All of the configuring, which involves SIMADYN D, is made in the
SIMATIC Manager. The work is divided into the "Selecting components in
HWConfig" and "Configuring with CFC" sections.
The configuration example is configured in HWConfig. The standard
program inputs can be accepted. The only changes involved:
• Sampling time T4 of the PM5 = 64ms
Communications configuring
SIEMENS
1
S 01 S 02 S 03 S 04 S 05 S 06 S 07
2
5
3
4
7
Communications submodule SS52
5
SIMATIC Operator Panel OP7PP
6
MPI bus cable
7
SIMADYN D
S 09 S 12
S 08 S 10 S 11
3-293