Siemens SIMADYN D Manual page 493

Connec-
tion
FCS.ARC Rated DC motor field current [A]
Condition: RRC ≥ ARC ≠ 0,
FCS.NF Normalization factor to interpret the setpoint
FCS.T
Delay when switching-in and switching-out
Condition: 0 ≤ T ≤ 100000 ms,
SOL.WCL Switch-in threshold for the torque direction (absolute value)
SOL.TH0 Thyristor hold-off time [ms]
Condition: 0.5 ms ≤ TH0 ≤ 131 ms, > YW2\bit 10 =1
SOL.TCP Thyristor pulse suppression time [ms]
Condition: 0.0 ms ≤ TH0 ≤ 20000 ms ,
SOL.TCD Monitoring time, torque change M1 ⇔ M2
SOL.TM0 Monitoring time, torque direction M0
PC6.LMP Main pulse length [ms]
PC6.LFP Second pulse length [ms]
PC6.AQL Test operation: Firing angle setpoint [ ° ]
PC6.AWS Shift to INV. op.: Firing angle setpoint [ ° ]
Condition: 90 ≤ AWS ≤ 180,
PC6.DAG Max. angular change/TA in the direction of rectifier op.
Condition: 0 ≤ DAG ≤ 180,
PC6.DAW Max. angular change/TA in the direction of inverter op.
Condition: 0 ≤ DAW ≤ 180,
CPC.VCI Current setpoint at the discontinuous limit, {0 < VCI <
discontinuous limit}
CPC.ALP Pre-control angle in the discontinuous range [ ° ],
{ ≥ 25° ... 30° ≤ }
starts when current starts to flow
CSP.GLI Gradient for setpoint smoothing
CSP.IL Gradient for integrator inhibit
Limit values
Connec-
tion
CAV.CX1 Max. current for torque direction M1 (abs. value)
CAV.CX2 Max. current for torque direction M2 (abs. value)
CPI.CLU Limit of the current-dependent inverter stability limit [ ° ]
CPI.ALU Inverter control limit of the firing angle [ ° ]
CPI.ALL Rectifier control limit of the firing angle [ ° ]
PA6.NAZ No. of failed line supply periods
Condition: 0 ≤ NAZ ≤ 3050,
PA6.NEP
No. of line supply periods
Condition: 0 ≤ NEP ≤ 5000,
System- and communication configuring D7-SYS - SIMADYN D
Edition 06.2002
Significance
> QSF\bit 12 = 1
> QSF\bit 12 = 1.
> YW2\bit10 =1
{ < 45[ ° ] el. }
{ < 45[ ° ] el. }
> QSF\bit 9 = 1
> QSF\bit 9 = 1
> QSF\bit 9 = 1
Significance
> QSF\bit 9 = 1
> QSF\bit 9 = 1
Closed-loop thyristor current control
Value Value
change
0.0
1.0
1500 ms
0.01
10 ms
20 ms
1000 ms
2000ms
1.1ms
1.1ms
150
150
60
150
0.1
25.0
0.6
0.6
Value Value
change
0.1
0.1
150.0
150.0
30.0
8
5
Type
Init
Init
Init
Init
Init
Type
Init
Init
Init
Init
5-53