Siemens SIMADYN D Manual page 30

MS5 program memory module
(for PM5)
PC card standard,
2 Mbyte flash memory and
8 Kbyte EEPROM
PC cable SC 57
Zero-modem cable
Expansion module IT41
(at slot 2)
16 digital inputs and outputs,
8 analog inputs and outputs,
4 incremental encoder inputs.
Interface cable SC 54
Length: 2 m
Interface module SB10
2 x 8 screw terminals,
LED displays
Fig. 1-1 Module list for the project example "My First Project"
NOTE
System- and communication configuring D7-SYS - SIMADYN D
Edition 12.2001
... saves the operating system,
the user program and the online
changes.
... connects the CPU module to
the PG/PC.
... expands the CPU module by
technology-specific functions. It is
especially fast, as it is directly
screwed to the CPU module and
the backplane bus is not used.
... connects the inputs/outputs of
the IT41 module with up to 5
SBxx or SU12 interface modules.
... allows you to test the user
program during commissioning
and in operation, as the statuses
of the digital outputs are
displayed using LEDs.
It is also possible to use other hardware platforms (T400, FM 458) by
appropriately taking this into account in the configuring.
Technical data is provided in the SIMADYN D Hardware Manual,
additional ordering information in Catalog DA99.
In just a few steps to the first project
6DD1610-0AH0
6DD1684-0FH0
6DD1606-3AC0
6DD1684-0FE0
6DD1681-0AE2
1-3