Siemens SIMADYN D Manual page 283

Communications configuring
From Excel to STL
3-194
The following sections explain, using examples, how to re-format an
Excel table to obtain the required table format.
The file example, shown in the following diagram, is formatted step-by-
step corresponding to the specifications of the required table format.
Fig. 3-76 An example of a table in MS Excel
(1) Header
Initially, the required header is inserted. To do this, 5 lines are inserted at
the beginning and the following data is entered:
• DATA_BLOCK DB 1 [number of the DB]
• TITLE = [enter as required]
• VERSION : 0.1 [version data]
System- and communication configuring D7-SYS - SIMADYN D
Edition 12.2003