Table of Contents
Advertisement
Communications configuring
Comment
Communication
associations
Station 1,
communications
association 6
Communications reference
Association type
Remote address
Max. PDU length
Password
Profile
Supported utilities
Read
Get OV (detailed version)
Max. number of parallel tasks:
Transmitting
Table 3-56
Mask, "Non-cyclic client": Station 1, communications association 6
3-124
• Station 1 writes into the object at station 2 with the index 6001, via its
communications association 6.
• Station 1 reads the object with PROFIBUS index 6001 at station 3 via
its communications association 6. Station 1 writes into the object with
the name "KLAUS___BGT3__1P" using the same communications
association.
• The SS5 firmware at station 3 assigns a PROFIBUS index to the
object "KLAUS___BGT3__1P". The SS5 firmware in station 1 first
retrieves the PROFIBUS index of this object using the "Get OV" FMS
utility. All other write accesses are realized per index to save time.
Station 1, communications association 2 and station 2, communications
association 2 (refer to example 1: Process data between two
SIMADYN D stations).
This is supplemented by:
• Station 1, communications association 6
• Station 3, communications association 3
:
6
:
MMAZ
:
3
:
241
:
0
:
0
:
:
.req
:
.req
:
2
Explanations:
• "30 s" was selected as "Monitoring interval".
Type
Non-cyclic client
:
Local LSAP
Remote LSAP
Monitoring interval
Group
Write
Information report
Symb. addressing
Receiving
Name :
System- and communication configuring D7-SYS - SIMADYN D
:
11
:
12
:
30 s
:
0
:
.req
:
No
:
.req
:
0
CLI REA/WRI 3
Edition 12.2003
- Quick Links:
- Software and Hardware
Hide quick links:
Advertisement
Table of Contents
