Configuring The Simolink Coupling Under Step 7 - Siemens SIMADYN D Manual

3.17.4.1

Configuring the SIMOLINK coupling under STEP 7

NOTE
Fig. 3-62 Configuring for FM458 with EXM448-1
System- and communication configuring D7-SYS - SIMADYN D
Edition 12.2003
For SIMATIC FM 458 with EXM 448-1, the basic clock cycle T0, possibly
the interrupt task Ix and the symbolic hardware assignment for the
SIMOLINK are set in the HW Config of STEP7 in the properties dialog
box.
The EXM 448-1 expansion module should be configured as EXM 448
in HWConfig.
Communications configuring
3-167