Siemens SIMADYN D Manual page 4

Foreword
Purpose of this
Manual
Basic knowledge
required
Validity of the
Manual
Additional support
Training Center
NOTE
System- and communication configuring D7-SYS - SIMADYN D
Edition 12.2003
This Manual explains the principle use and functions of the STEP 7
automation software with the main focus on the appropriate technological
and drive control components T400, FM 458-1 DP, SIMADYN D,
SIMATIC TDC or D7-SYS.
This Manual addresses programmers and commissioning engineers.
General knowhow regarding automation technology is required in order to
understand the contents of the Manual
This Manual is valid for SIMATIC D7-SYS Version 6.1.
If you have questions relating to the use of the products described in the
Manual, which cannot be answered here, then please contact your local
Siemens office. You can also call the Hotline:
• Tel.:
+49(9131) 98-5000
• Fax:
+49(9131) 98-1603
• e-mail:
adsupport@siemens.com
Appropriate training courses are available in order to make it easier to get
to know the SIMADYN D automation system. Please contact the central
Training Center in D-Erlangen (I&S IS INA TC):
• Tel.:
+49(9131) 7-27689, -27972
• Fax:
+49(9131) 7-28172
• Internet:
www.siemens.de/sibrain
• Intranet:
http://info-tc.erlm.siemens.de/
This user part of the Manual does not include any detailed
information/instructions with individual descriptions, but is only intended
to provide a basic procedure. More detailed information on the dialog
boxes in the software and how they are handled is provided in the
appropriate online help.
iii