Advertisement
Upgrading to TPC Software v2.6 or Higher
Check Your New "C:\Tpcsuite26\Install" Contents
Unzip Christie's TPCSuite**.zip package to a desired location on your local drive. The following files will be
stored under the "\INSTALL\" directory at that desired location:
•
TpcInstaller.exe= TPC installer (Note:
•
INSTALL.LNK= factory install (Note:
with factory default scheme 192.168.206.110)
•
TPC642.IST= installation file for TPC-642 model
•
FONT642.IST= Chinese and Japanese character font for TPC-642
•
TPC60.IST= installation file for TPC-60/TPC-66 models (with fonts)
Upgrade Procedure
FFFTP is a freeware FTP client application recommended for communicating with the TPC via file transfer
protocol (Note: FFFTP is the only supported FTP software.). When installed and configured on a PC, the PC
and TPC can transfer files back-and-forth via FTP—PC files appear in the left window, TPC files appear on
the right. For this upgrade to take effect, you will be required to replace the "INSTALL" directory located on
the TPC at "/Storage Card/INSTALL" (Right Window) with the "INSTALL" directory extracted from TPC
Suite (Left Window).
Configuring The Ftp Connection:
Run FFFTP. At the main window, click the Connect icon or File Connect menu. The Host List box
1.
should appear:
Note:
Screen shots throughout this document are for representation purposes only and may differ slightly from
those on your screen.
Page 2 of 9
This file should always be used unless performing a Scratch Install.)
Shortcut for a factory default installation - will overwrite IP settings
010-101108-01 Rev. 1 (11/06)
Advertisement
