Xilinx Zynq UltraScale+ ZCU208 User Manual page 49

User I/O
[Figure 2, callout 23, 24, and 25]
The ZCU208 board provides these user and general purpose I/O capabilities:
• Eight sets of three single color LEDs (24 LEDs total) (callout 23)
LED_0: DS54
○
LED_1: DS55
○
LED_2: DS56
○
LED_3: DS57
○
LED_4: DS58
○
LED_5: DS59
○
LED_6: DS60
○
LED_7: DS61
○
• 8-position user DIP switch (callout 23)
GPIO_DIP_SW[7:0]: SW14
○
• Five user pushbuttons and a CPU reset PB switch (callouts 24 and 25)
GPIO_SW_[NWCES]: SW8, SW9, SW10, SW11, SW12
○
CPU_RESET: SW13
○
The detailed RFSoC connections for the feature described in this section are documented in the
ZCU208 board XDC file, referenced in
Power and Status LEDs
[Figure 2, area of callouts 17 and 18]
The following table defines the power and status LEDs. For user controlled GPIO LED details, see
User I/O.
Table 20: Power and Status LEDs
Schematic Net
Ref. Des.
DS1 MIO23_LED
DS2 PS_INIT_B
DS3 PS_DONE
UG1410 (v1.0) July 8, 2020
ZCU208 Board User Guide
Appendix B: Xilinx Design
LED
Name Color
Green RFSoC U1 Bank 500 GPIO LED
Green/ Red Green: FPGA initialization was successful Red: FPGA initialization is in
progress
Green RFSoC U1 bit file download is complete
Chapter 3: Board Component Descriptions
Constraints.
Description
Send Feedback
www.xilinx.com
49