Clearing The Active Health System Log; Ilo Remote Console - HPE ProLiant e910 User And Maintenance Manual

Files that are larger than 25 MB must be compressed and uploaded to an FTP site. If needed, contact Hewlett Packard
Enterprise for FTP site information.
7. (Optional) Upload the file to the Active Health System Viewer.
For more information, see http://www.hpe.com/servers/ahsv.

Clearing the Active Health System Log

If the log file is corrupted, or if you want to clear and restart logging, clear the Active Health System Log.
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Information in the navigation tree, and then click the Active Health System Log tab.
The Active Health System Log is inaccessible when it is being downloaded by Intelligent Provisioning, the iLO Service Port,
or any other method.
2. Click Show Advanced Settings.
3. Scroll to the Clear Log section, and then click Clear.
4. When prompted to confirm the request, click Yes, clear.
iLO notifies you that the log is being cleared.
5. Reset iLO.
Resetting iLO is required because some Active Health System data is recorded to the log only during iLO startup.
Performing this step ensures that a complete set of data is available in the log.
6. Reboot the server.
Rebooting the server is required because some information, such as the operating system name and version, is logged at
server startup. Performing this step ensures that a complete set of data is available in the log.

iLO remote console

The iLO remote console can be used to remotely access the graphical display, keyboard, and mouse of the host server. The
remote console provides access to the remote file system and network drives.
With remote console access, you can observe POST messages as the server starts, and initiate ROM-based setup activities to
configure the server hardware. When you install an OS remotely, the remote console (if licensed) enables you to view and
control the host server monitor throughout the installation process.
Integrated remote console (IRC) access options
You can access the following integrated remote console options from the iLO web interface:
HTML5 integrated remote console—For clients with a supported browser.
•
• .NET integrated remote console—For Windows clients with a supported version of the Windows .NET Framework. This
console is not supported by Google Chrome or Mozilla Firefox because these browsers do not support a ClickOnce
extension to launch .NET applications.
Java integrated remote console (Web Start)—For Windows or Linux clients with the Oracle JRE.
•
• Java integrated remote console (Applet)—For Windows or Linux clients with the Java plug-in.
100 Using HPE iLO 5