Ilo Repository - HPE ProLiant e910 User And Maintenance Manual

To change the sort order to ascending or descending, click the column heading again or click the arrow icon next to the
column heading.
3. (Optional) Click an individual maintenance window to view detailed information.
Maintenance window summary details
The Maintenance Windows tab displays the iLO Date/Time and the following details about each configured maintenance
window:
• Name—The user-defined name for the maintenance window.
• Start time—The maintenance window start time (UTC).
End time—The maintenance window end time (UTC).
•
Maintenance windows are automatically deleted 24 hours after they expire.
Individual Maintenance Window details
When you click an individual maintenance window, the following details are displayed:
• Name—The user-defined name for the maintenance window.
Start—The maintenance window start time (UTC).
•
End—The maintenance window end time (UTC).
•
• Description—A description of the maintenance window.

iLO Repository

The iLO Repository is a secure storage area in the nonvolatile flash memory embedded on the system board. The nonvolatile
flash memory is 4 gigabytes in size and is called the iLO NAND. Use SUM or iLO to manage signed software and firmware
components in the iLO Repository.
iLO, the UEFI BIOS, SUM, and other client software can retrieve these components and apply them to supported servers. Use
SUM to organize the stored components into install sets and SUM or iLO to manage the installation queue.
To learn more about how iLO, SUM, and the BIOS software work together to manage software and firmware, see the SUM
documentation.
Adding a component to the iLO Repository
Use the Upload to iLO Repository pane to add components to the iLO Repository. The Upload to iLO Repository pane is
available whenever you view a tab on the Firmware & OS Software page.
Prerequisites
• The Configure iLO Settings privilege is required for uploading files to the iLO Repository.
• The Recovery Set privilege is required for making an optional update to the System Recovery Set after you upload a file to
the iLO Repository.
If you want to use the Update Recovery Set feature, a System Recovery Set must exist and contain the component you
•
want to update.
Procedure
1. Click Firmware & OS Software in the navigation tree, and then click Upload to iLO Repository.
Using HPE iLO 5 85