Mechanical Specifications; Power Supply Specifications; 1500W Hot-Plug Power Supply - HPE ProLiant e910 User And Maintenance Manual

Table 3: Extended Edgeline specifications
Specification
Temperature range
Operating
Nonoperating
Relative humidity (noncondensing)
Operating
Non-Operating
1
All temperature ratings shown are for sea level. An altitude derating of 1.0°C per 305 m (1.8°F per 1,000 ft) to 3,048 m (10,000 ft) is
applicable. No direct sunlight allowed. Maximum rate of change is 20°C per hour (36°F per hour). No restrictions on product configurations
except for rotating hard drives. PCI cards must be rated for continuous operation with 60°C cooling air. Solid-state drives must be rated for
continuous operation with 65°C cooling air. Not rated for operation over 3,030 m (10,000 ft).

Mechanical specifications

Specification
Height
Depth
Width

Power supply specifications

Depending on installed options, the server is configured with one of the following power supplies:
• 1500W Hot Plug Power Supply
• 1500W -48VDC Hot Plug Power Supply
For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise website (http://
www.hpe.com/info/proliant/powersupply).

1500W Hot-plug Power Supply

Specification
Input requirements
Rated input voltage
174 Specifications
1
Value
—
0°C to 55°C (32°F to 131°F)
-30°C to 60°C (-22°F to 140°F)
—
8% to 90% at 28°C (82.4°F) maximum wet bulb temperature
5% to 95% at 38.7°C (101.7°F) maximum wet bulb
temperature
Value
16.71 cm (6.57 in)
1.98 cm (0.78 in)
18.37 cm (7.23 in)
Value
—
90 VAC to 264 VAC
Table Continued