Configuring Ilo Access Options; Ilo Default Dns Name And User Account; Ilo Licensing - HPE ProLiant e910 User And Maintenance Manual

The default value is 10 seconds.
Authentication Failures Before Delay
Enables you to configure the number of failed login attempts that are allowed before iLO imposes a login delay. The
following values are valid: 1, 3, 5, or every failed login attempt.
The default setting is 1, which means that a login delay is not imposed until the second failed login attempt.

Configuring iLO access options

Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Security in the navigation tree, and then click the Access Settings tab.
2. Update the access options as needed.
3. Click Apply.
If you changed a value that does not require a reset, iLO completes the change and refreshes the page.
If you changed a value that requires a reset to take effect, iLO saves the change and prompts you to confirm that you want
to reset iLO.
4. If iLO prompted you to reset, click Yes, reset to end your browser connection and reset iLO.
The changes take effect when the iLO reset is complete.

iLO default DNS name and user account

The iLO firmware is configured with a default user name, password, and DNS name. The default information is on the serial
label pull tab attached to the server that contains the iLO management processor. Use these values to access iLO remotely
from a network client by using a web browser.
• User name—Administrator
Password—A random eight-character string
•
DNS name—ILOXXXXXXXXXXXX, where the X characters represent the server serial number.
•
IMPORTANT: Hewlett Packard Enterprise recommends changing the default password after you log in to iLO for the
first time.
If you reset iLO to the factory default settings, use the default iLO user account to log in after the reset.

iLO licensing

iLO standard features are included with every server to simplify server setup, perform health monitoring, monitor power and
thermal control, and facilitate remote administration.
iLO licenses activate features such as the graphical Remote Console with multiuser collaboration, video record and playback,
and many more features.
Visit our list of standard features versus advanced features and how to obtain a license by visiting our iLO license guide at
http://www.hpe.com/support/iLOLicenseGuide-en. To purchase an iLO Advanced License now, visit https://
www.hpe.com/us/en/product-catalog/detail/pip.332279.html.
Setting up iLO 65