Installing The Nvme M.2 Enablement Option - HPE ProLiant e910 User And Maintenance Manual

Installing the NVMe M.2 enablement option

Procedure
1. Power down the server blade.
2. Remove the server blade from the chassis.
3. For 2U server blade, do the following:
a. Remove the top cover.
b. Remove the air baffle.
4. For 1U server blade, install the NVMe M.2 enablement board:
a. Align the slot on the M.2 enablement board with the alignment post on the server blade.
b. Secure the board with screws.
5. For 2U server blade, install the NVMe M.2 enablement board:
a. Install the NVMe M.2 enablement board.
b. Secure it with screws.
Hardware options installation 27