Service Settings - HPE ProLiant e910 User And Maintenance Manual

The values you enter on the Access Settings page apply to all iLO users.

Service settings

You can configure the following settings in the Service section on the Access Settings page.
Secure Shell (SSH)
Allows you to enable or disable the SSH feature.
SSH provides encrypted access to the iLO CLP.
Secure Shell (SSH) Port
Sets the SSH port. The default value is 22.
Web Server
Allows you to enable or disable access through the iLO web server.
If you set this value to disabled, iLO will not listen for communication on the Web Server Non-SSL Port or the Web Server
SSL port. The following features will not work when the web server is disabled: RIBCL, iLO RESTful API, remote console,
iLO Federation, and the iLO web interface.
When this option is disabled, the configured Web Server Non-SSL Port (HTTP) and Web Server SSL Port (HTTPS) are
not detected in a security audit that uses a port scanner to scan for security vulnerabilities.
Web Server Non-SSL Port (HTTP)
Sets the HTTP port. The default value is 80.
Web Server SSL Port (HTTPS)
Sets the HTTPS port. The default value is 443.
Remote Console
Allows you to enable or disable access through the iLO remote consoles.
When this option is disabled, the HTML5 IRC, .NET IRC, Java IRC, standalone remote console, and text-based remote
console are disabled. The configured remote console port is not detected in a security audit that uses a port scanner to
scan for security vulnerabilities.
Remote Console Port
Sets the remote console port. The default value is 17990.
Virtual Media
Allows you to enable or disable the iLO Virtual Media feature.
When this option is disabled, local and URL-based Virtual Media features are disabled. The configured Virtual Media port
is not detected in a security audit that uses a port scanner to scan for security vulnerabilities.
Virtual Media Port
The port that iLO uses to listen for incoming local Virtual Media connections. The default value is 17988.
SNMP
Specifies whether iLO responds to external SNMP requests.
If you disable SNMP access, iLO continues to operate, and the information displayed in the iLO web interface is updated.
In this state, no alerts are generated and SNMP access is not permitted.
When SNMP access is disabled, most of the boxes on the SNMP Settings page are unavailable and will not accept input.
SNMP Port
Sets the SNMP port. The industry-standard (default) SNMP port is 161 for SNMP access.
60 Setting up iLO