Viewing Software Information - HPE ProLiant e910 User And Maintenance Manual

Table of Contents

The name of the iLO firmware image file is similar to iLO 5_<yyy>.bin, where <yyy> represents the firmware

version.

Obtaining supported server firmware image files

Procedure

1. Navigate to the following website: http://www.hpe.com/support/hpesc.

2. To locate and download an Online ROM Flash Component file, follow the onscreen instructions.

3. If you downloaded a Windows component:

a. Double-click the downloaded file, and then click the Extract button.

b. Select a location for the extracted files, and then click OK.

4. If you downloaded a Linux component:

a. For Linux components, depending on the file format, enter one of the following commands:

•

#./<firmware_file_name>.scexe –unpack=/tmp/

•

#rpm2cpio <firmware_file_name>.rpm | cpio -id

b. (Optional) If you are working with an Innovation Engine or Server Platform Services (SPS) firmware component, locate

the <firmware_file_name>.zip file, and extract the binary file.

Server firmware file type details

•

When you update the system ROM, you must use a signed image or the signed ROMPAQ image:

◦

Signed image example:

http://<server.example.com:8080>/<wwwroot>/P79_1.00_10_25_2013.signed.flash

◦

Signed ROMPAQ image example:

http://<server.example.com>/<wwwroot>/CPQPJ0612.A48

•

The Power Management Controller, chassis firmware, and NVMe backplane files use the file extension .hex. For example,

the file name might be similar to ABCD5S95.hex.

•

The System Programmable Logic Device (CPLD) firmware file uses the file extension .vme.

•

The Innovation Engine (IE) and Server Platform Services (SPS) firmware files use the file extension .bin.