About This Manual - SMART Embedded Computing MVME3100 Installation And Use Manual

About this Manual

Overview of Contents
The MVME3100 Single Board Computer Installation and Use manual provides the
information you will need to install and configure your MVME3100 single board computer
and MVME721 rear transition module (RTM). It provides specific preparation and
installation information, and data applicable to the board.
This manual is divided into the following chapters and appendices:
Safety Notes
Sicherheitshinweise
Chapter 1, Hardware Preparation and
preparation and installation instructions, as well as ESD precautionary notes.
Chapter 2, Startup and
the switches and indicators on the MVMEM3100.
Chapter 3, MOTLoad
firmware product.
Chapter 4, Functional
RTM on a block diagram level.
Chapter 5, Pin
connectors on the MMVE3100 single board computer.
Chapter 6, Memory
configuration registers.
Chapter 7, Programming
including IDSEL mapping, interrupt assignments for the MPC8540 interrupt
controller, Flash memory, two-wire serial interface addressing, and other device
and system considerations.
Appendix A,
specifications.
Appendix B, Related
Computing manuals, vendor documentation, and industry specifications.
MVME3100 Single Board Computer Installation and Use (6806800M28H)
summarizes the safety instructions in the manual.
is a German translation of the Safety Notes chapter.
Operation, provides the power-up procedure and identifies
Firmware, describes the basic features of the MOTLoad
Description, describes the MVME3100 and the MVME721
Assignments, provides pin assignments for various headers and
Maps, provides information on memory maps and system and
Details, provides additional programming information
Specifications, provides power requirements and environmental
Documentation, provides a listing of related Smart Embedded
Installation, provides MVME3100 board
11