About This Manual - SMART Embedded Computing ATCA-F125 Assembly, Installation And Use

About this Manual

Overview of Contents
This manual is divided into the following chapters and appendices.
Safety Notes on page 15
Sicherheitshinweise on page 21
Chapter 1, Introduction on page 29
standard compliances, mechanical data, and ordering information.
Chapter 2, Hardware Preparation and Installation on page 33
requirements, hardware accessories, and installation procedures.
Chapter 3, Controls, LEDs, and Connectors on page 51
board. This include connectors, LEDs, and mechanical switches.
Chapter 4, Functional Description on page 69
description of major components of the product.
Chapter 5, U-Boot on page
Appendix A, Battery Exchange on page 113
battery.
Appendix B, Related Documentation on page 115
documentation, manufacturer's documents, and industry standard specifications.
Abbreviations
This document uses the following abbreviations:
Abbreviation
ATCA
AMC
IPMI
IPMC
JTAG
PICMG
POST
PrAMC
RTM
ATCA-F125 (6873M Artwork) Installation and Use (6806800J94P)
summarizes the safety instructions in the manual.
is a German translation of the Safety Notes chapter.
gives an overview of the features of the product,
includes a block diagram and functional
101describes the boot firmware.
contains the procedures for replacing the
Definition
Advanced Telecom Computing Architecture
Advanced Mezzanine Card
Intelligent Platform Management Interface
Intelligent Platform Management Controller
Joint Test Action Group
PCI Industrial Computer Manufacturers Group
Power-on Self Test
Processor Advanced Mezzanine Card
Rear Transition Module
outlines the installation
describes external interfaces of the
provides a listing of related product
11