Serial Port Connectors (Com1/J41A, Com2-Com5/J2A-D); Vmebus P1 Connector; Table 5-10 Com Port Connector Pin Assignments; Table 5-11 Vmebus P1 Connector Pin Assignments - SMART Embedded Computing MVME3100 Installation And Use Manual

Serial Port Connectors (COM1/J41A, COM2–COM5/J2A-D)
5.2.4 Serial Port Connectors (COM1/J41A, COM2–COM5/J2A-D)
There is one front access asynchronous serial port interface (SP0) that is routed to the RJ-
45 front-panel connector. There are four asynchronous serial port interfaces, SP1 – SP4,
which are routed to the P2 connector. The pin assignments for these connectors are as
follows:

Table 5-10 COM Port Connector Pin Assignments

Pin
1
2
3
4
5
6
7
8
5.2.5

VMEbus P1 Connector

The VME P1 connector is a 160-pin DIN. The P1 connector provides power and VME
signals for 24-bit address and 16-bit data. The pin assignments for the P1 connector is as
follows:
Table 5-11
Pin
1
2
3
4
5
6
92
Signal
No connect
RTS
GND
TX
RX
GND
CTS
No connect
VMEbus P1 Connector Pin Assignments
ROW Z ROW A
Reserved D00
GND D01
Reserved D02
GND D03
Reserved D04
GND D05
MVME3100 Single Board Computer Installation and Use (6806800M28H)
ROW B ROW C
BBSY* D08
BCLR* D09
ACFAIL* D10
BG0IN* D11
BG0OUT* D12
BG1IN* D13
Pin Assignments
ROW D
+5V
GND
Reserved
Reserved
Reserved
Reserved