About This Manual - SMART Embedded Computing MVME7100 Programmer's Reference Manual

About this Manual

Overview of Contents
This manual is divided into the following chapters and appendices:
Chapter 1,
the architecture of the MVME7100 Single Board Computer.
Chapter 2, Memory
Chapter 3, Register
Chapter 4, Programming
MVME7100 single-board computer.
Appendix A, Programmable Configuration
information including IDSEL mapping, interrupt assignments for the MC864
controller, flash memory, two-wire serial interface addressing, and other device and system
considerations.
Appendix B, Related
vendor documentation, and industry specifications.
Abbreviations
This document uses the following abbreviations:
Acronym
ASCII
CRC
EEPROM
FRU
Flash
GB
HEX
Hz
IPMI
MB
Mfg
MVME7100 Single Board Computer Programmer's Reference (6806800E82C)
Introduction, provides a brief product description and a block diagram showing
Maps, provides information on the board's memory maps.
Descriptions, contains status registers for the system resources.
Details, includes additional programming information for the
Documentation, provides a listing of related SMART EC manuals,
Description
American Standard Code for Information Interchange
Cyclic Redundancy Check
Electrically Erasable Programmable Read Only Memory
Field Replaceable Unit
Flash Memory
Gigabyte
Hexadecimal
Hertz
Intelligent Platform Management Interface
Megabyte
Manufacturing
Data, provides additional programming
D interrupt
x
9