Cw-80 & Cw-80S - Return Air Option; All Models - Weatherseals - Seeley Climate Wizard CW-80 Installation & Operation Manual

INSTALLATION cont.
CW-80 & CW-80S - Return Air Option
A Return Air Duct can be mounted to the top of the cooler
at the control enclosure end as per the below diagram.
Refer to Appendix for mounting details.
It is imperative that the fitment of return air ducting does
not impede access to the supply fans and centre corridor
access cover.
REMOVE PANEL TO FIT
REMOVE PANEL TO
RETURN AIR DUCT
FIT RETURN AIR DUCT
ILL2317-A
ILL2317-A
IMPORTANT:
ENSURE ACCESS TO THESE
2 PANELS FOR SERVICING
AND MAINTENANCE
PURPOSES
ILL2316-A

All models - Weatherseals

All models are fitted with standard weatherseals.
Weatherseals shroud the exhaust fans to ensure free
exhaust air evacuation away from the cooler inlet. They
act as a safety device and also prevent the outside
air from entering the cooler. Depending on the degree
of dis-assembly during transport, the "Weatherseal
Top Assembly" may need to be assembled to the
"Weatherseal Bottom Assembly".
Use 4 off M8 screw assembly A to fasten the two
assemblies together.
INSTALLATION, OPERATION & MAINTENANCE MANUAL 866600CE-B | 17
ILL2302-A
ILL2303-A
ILL2302-A