Cw-80T & Cw-80T-Twin Supply Fans - Seeley Climate Wizard CW-80 Installation & Operation Manual

INSTALLATION cont.
The Exhaust Fans can now be positioned so that the
plugs are aligned correctly with the sockets pushed
through the grommets.
Connect plugs to sockets, taking special care that the key
on the plug aligns with the key slot on the socket.
Use 4 off "M8 screw assembly A" as supplied, to fasten
each Exhaust Fan to the cooler.
M8 SCREW
M8 SCREW
ASSEMBLY "A"
ASSEMBLY "A"
M8 FLAT
WASHER
M8 SCREW
ASSEMBLY "A"
ILL2220-A
ASSEMBLY "B"
M8 SPRING
WASHER
M8 SCREW
ILL2221-A
ILL2222-A
CW-80T & CW-80T-TWIN Supply Fans
As well as the Exhaust Fan, the Supply Fan power and
Supply Fan controls of the CW-80T and the CW-80T-
TWIN are connected using plugs and sockets. Sockets
will need to be carefully pushed through grommets on top
of the cooler as per diagram below ready for connection
to supply fan plugs.
Do this before fans are bolted into position.
POWER
POWER
PLUG
PLUG
CONTROL CONTROL
PLUG
PLUG
POWER
POWER
PLUG
PLUG
CONTROL
CONTROL
PLUG PLUG
M8 SCREW
ILL2221-A
INSTALLATION, OPERATION & MAINTENANCE MANUAL 866600CE-B | 15
CONTROL
POWER
CONTROL
POWER
CONTROL PANEL END
CONTROL
PLUG
PLUG
POWER
PLUG
PLUG
CONTROL
PLUG
PLUG
POWER
PLUG
PLUG
ILL2307-A
ILL2308-A
ILL2308-A