TRANSPORT
All models - Loose Components
Due to transport height and width limitations, exhaust fan/
motors, exhaust weatherseals and air filter assemblies
are shipped on a separate pallet for on-site installation.
For multi-cooler shipments, this pallet may be packed on
a separate transport.
All models - Road Transport
For road transport it is recommended to securely chain
as per diagram.
All models - Shipping Container
Climate Wizard coolers feature an integrated hook for
dragging the cooler out of the container.
10 |
CW-80 Container Cooler 866600CE-B
Safely attach the chain to the hook and drag the cooler
out until the cross beam with the welded hook is clear of
the container.
Reposition the fork lift and chain so that the fork lift tines
can support the weight of the cooler as it is dragged fully
out of the container. Ensure that a piece of timber longer
than the width of the container is positioned at a height
of ~ 12 mm below the floor of the container close to the
opening to ensure that the cooler does not drop onto the
ground once it leaves the container.
ILL2156-A
ILL2156-A
Ensure that the cooler is dragged out parallel to the
container floor to ensure that damage to the top of the
cooler does not occur.
ILL2157-A
ILL2157-A
ILL2158-A
O
P
ILL2158-A
ILL2159-A
ILL2159-A
ILL2155-A