Operating Instructions; Startup Single Speed To Provide Ventilation; Shutdown Single Speed Providing Cool Air; Shutdown Single Speed Providing Ventilation - Seeley Aira AL Series Installation And Operation Manual

OPERATING INSTRUCTIONS

5.1 STARTUP SINGLE SPEED – WALL SWITCH UNITS TO PROVIDE COOL AIR
1. Switch the FAN switch to ON.
2. Switch the COOL switch to ON.
3. Switch the Wall Switch ON/OFF switch to ON.
5.2 STARTUP SINGLE SPEED - WALL SWITCH UNITS TO PROVIDE VENTILATION
1. Switch the FAN switch to ON.
2. Switch the COOL switch to OFF.
3. Switch the Wall Switch ON/OFF switch to ON.
5.3 SHUTDOWN SINGLE SPEED - WALL SWITCH UNITS PROVIDING COOL AIR
1. Switch the Wall Switch ON/OFF switch to OFF.
2. Switch the FAN switch to OFF.
3. Switch the COOL switch to OFF.
5.4 SHUTDOWN SINGLE SPEED - WALL SWITCH UNITS PROVIDING VENTILATION
1. Switch the Wall Switch ON/OFF switch to OFF.
2. Switch the FAN switch to OFF.
3. Switch the COOL switch to OFF.
5.5 STARTUP DUAL SPEED – WALL SWITCH UNITS TO PROVIDE COOL AIR
1. Switch the FAN switch to HIGH or LOW depending on desired flow.
2. Switch the COOL switch to ON.
3. Switch the Wall Switch ON/OFF switch to ON.
5.6 STARTUP DUAL SPEED – WALL SWITCH UNITS TO PROVIDE VENTILATION
1. Switch the COOL switch to OFF.
2. Switch the FAN switch to HIGH or LOW depending on desired flow.
3. Switch the Wall Switch ON/OFF switch to ON.
5.7 SHUTDOWN DUAL SPEED – WALL SWITCH UNITS PROVIDING COOL AIR
1. Switch the Wall Switch ON/OFF switch to OFF.
2. Switch the COOL switch to OFF.
5.8 SHUTDOWN DUAL SPEED – WALL SWITCH UNITS PROVIDING VENTILATION
1. Switch the Wall Switch ON/OFF switch to OFF.
2. Switch the COOL switch to OFF.

5.9 BMS STARTUP AND SHUTDOWN

It is the responsibility of the BMS installer to provide instruction and training on the operation of the interface.
Note:
1. BMS wiring should be done in accordance with Appendix A: Electrical Information. No changes should be made to
the internal control box wiring.
AL SERIES INSTALL OPERATION MAINTENANCE MANUAL |
25