Siemens SINUMERIK 840D Series Diagnostics Manual page 461

11.02
Program Continuation:
120301
Definitions:
Reactions:
Remedy:
Program Continuation:
120302
Definitions:
Reactions:
Remedy:
Program Continuation:
120303
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
120304
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
120305
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
 Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA) – 11.02 Edition
Internal
Faulty entry for hardkey 'Program' in Keys.ini.
The configuration in Keys.ini is wrong.
- Alarm display.
In Keys.ini, the parameter ChildTask:=26 has to be set in the line KEY2.0=.
The alarm can also be acknowledged manually via diagnostics.
Internal
The selection is not possible. A program has to have been edited first via the area
'Program'.
A program can only be selected via the hardkey program if a program has already been
edited in the program area.
- Alarm display.
The alarm disappears automatically as soon as a program is edited or simulated in the
program area.
The alarm can also be acknowledged manually via diagnostics.
Internal
The selection is not possible. The edited file %1 no longer exists.
%1 = Program name with path
The file edited last in the program area has in the meantime been deleted.
- Alarm display.
The alarm disappears automatically as soon as a program is edited or simulated in the
program area.
The alarm can also be acknowledged manually via diagnostics.
Internal
The selection is not possible. The file %1 has insufficient read rights.
%1 = Program name with path
The file has insufficient read rights for the current access level.
- Alarm display.
Set the required read rights by means of keyswitch or password entry.
The alarm disappears automatically as soon as a program is edited or simulated in the
program area.
The alarm can also be acknowledged manually via diagnostics.
Internal
Selection is not possible. The file %1 is currently being edited.
%1 = Program name with path
The file is currently open in another application (e.g. services) with an editor.
- Alarm display.
Change the program in the already open editor.
The alarm disappears automatically as soon as a program is edited or simulated in the
program area.
The alarm can also be acknowledged manually via diagnostics.
Internal
1 Alarms
1-461