Siemens SINUMERIK 840D Series Diagnostics Manual page 458

1 Alarms
112650
Definitions:
Reactions:
Remedy:
Program Continuation:
112999
Definitions:
Reactions:
Remedy:
Program Continuation:
120000
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
120001
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
120002
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
120003
Parameters:
Definitions:
Reactions:
1-458
Unknown PLC error
The PLC has announced an error that is unknown in the operator panel.
- NC Start disable in this channel.
- Alarm display.
Press POWER ON, inform Siemens.
Internal
Faulty grafic data. Exit graphic and restart
More data was generated than can be read from the operator panel.
Stop the graphic.
- Alarm display.
Deselect the graphic and then select it again.
Internal
Area %1 cannot be loaded! Acknowledge alarm, press area switchover key!
%1 = Operating area name
One of the applications listed in the REGIE.INI could not be started.
- Alarm display.
Check whether the entry in REGIE.INI is correct.
Internal
Area %1 cannot be selected. Please deactivate area %2
%1 = Operating area name
%2 = Operating area name
Within the scope of an area switchover, a different area is to be terminated (unloaded).
However, the area refuses this.
The area switchover does not take place.
- Alarm display.
Try again and, if possible, close the reluctant area first.
Internal
Area %1 is still active. Please deactivate area %1
%1 = Operating area name
When the MMC system is closed (closing the master control), an area is to be terminated.
However, the area refuses this.
The system was NOT closed.
- Alarm display.
Try again and, if possible, close the reluctant area first.
Internal
Area %1 cannot be deactivated. Please try again
%1 = Operating area name
Within the scope of an area switchover, an area is to be deselected.
However, the area refuses this.
The area switchover does not take place.
- Alarm display.
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA) – 11.02 Edition
 Siemens AG, 2002. All rights reserved
11.02