Siemens SINUMERIK 840D Series Diagnostics Manual page 128

1 Alarms
12140
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
12150
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
12160
Parameters:
Definitions:
Reactions:
1-128
Channel %1 block %2 functionality %3 not implemented
%1 = Channel number
%2 = Block number, label
%3 = Software construct in the source text
In the full configuration of the control functions are possible that are not yet implemented
in the current version.
- Alarm display.
- Interface signals are set.
- Correction block
Press the NC Stop key and select the function "Correction block" with the soft key PRO-
GRAM CORRECT. The correction pointer positions on the incorrect block.
The displayed function must be removed from the program.
Clear alarm with NC START or RESET key and continue the program.
Channel %1 block %2 operation %3 not compatible with data type
%1 = Channel number
%2 = Block number, label
%3 = String (violating operator)
The data types are not compatible with the required operation (within an arithmetic
expression or in a value assignment).
Example 1:
Arithmetic operation
N10 DEF INT OTTO
N11 DEF STRING[17] ANNA
N12 DEF INT MAX
:
N50 MAX = OTTO + ANNA
Example 2:
Value assignment
N10 DEF AXIS DRILL N11 DEF INT OTTO: N50 OTTO = DRILL
- Alarm display.
- Interface signals are set.
- Correction block
Press the NC Stop key and select the function "Correction block" with the soft key PRO-
GRAM CORRECT. The correction pointer positions on the incorrect block.
Alter the definition of the variables used such that the required operations can be exe-
cuted.
Clear alarm with NC START or RESET key and continue the program.
Channel %1 block %2 range of values exceeded
%1 = Channel number
%2 = Block number, label
The programmed constant or the variable exceeds the value range that has previously
been established by the definition of data type.
- Alarm display.
- Interface signals are set.
- Correction block
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA) – 11.02 Edition
 Siemens AG, 2002. All rights reserved
11.02