General; Precautions - Honeywell Fusion4 MSC-L Installation & Operation Manual

USA (FM) and Canada (CSA)
Safety
Remarks
level
Class 1,
Division 2
Safe -
Area
2- 14
Safety - Safety Instructions for the IR Controller
Safety
Level
Class 1,
WARNING!
Do not open Division 2
battery
compartment
in a hazardous
area. Use only
approved
batteries, see
label.
Safe
Zone

2.4.1 General

The Fusion4 IR Controller is a hand-held remote controller, which is an
infrared-type control device. The device facilitates programming the
Enraf Fluid Technology IR Controlled Equipment remotely.
The device contains all the necessary program codes installed. Hence,
the user programming is not required.

2.4.2 Precautions

Clean the device with a damp cloth.

Use additional protection in areas where damage may occur.

Do not repair the device without permission to avoid the invalidation

of the certificate.
Do not leave the device in direct sunlight or place it near a heat

source.
Handle the device gently. Do not drop the device or subject it to other

types of stress.
Do not touch any solvent or aggressive substances before touching

the enclosure as it is made of plastic.
Store the device at room temperature in a clean and dry location.

To avoid damage to the device or shortening of battery life, use the

correct type of batteries.
To prevent battery usage when storing the device in an unused

condition for a long time, make sure that the buttons are not pressed.
To prevent damage caused by leaking batteries, remove the

batteries before storing the device in an unused condition for a long
time.
Fusion4 MSC-L
Installation & Operation Manual
Canada (CSA)
Remarks
WARNING!
Do not open
battery
compartment
in a
hazardous
area. Use only
approved
batteries, see
label.
-
Rest of the World (ATEX /
IECEx)
Safety
Remarks
level
Zone 2
WARNING!
Do not open
battery
compartment
in a hazardous
area. Use only
approved
batteries, see
label.
Safe -
Zone
Part No.: 4418309_Rev09
Honeywell