Honeywell Fusion4 MSC-L Installation & Operation Manual page 211

FIGURE 5-16
FIGURE 5-17
Part No.: 4418309_Rev09
Honeywell
Operation - Menu and Navigation
5.4.10 Status Bar
The Status Bar is always visible on all screens and provides the
following information.
 Context specific information/directions to the user.
 Status of the connectivity (for example, the LAD or the IR
controller).
 Status of TAS.
 Actual time.
Optionally, the status bar also displays a seal icon.
 The seal icon is displayed when the MSC-L is configured as W&M
intended and compliant for W&M custody transfer operations. See
FIGURE 5-16 for an example of the status bar displaying the seal
icon.
 The seal icon is displayed with a black strikethrough when the
MSC-L is configured as W&M intended but not compliant for W&M
custody transfer operations. See FIGURE 5-17 for an example of
the status bar displaying the seal icon with a strikethrough.
 The seal icon is not displayed when the MSC-L is not configured
as not intended for W&M custody transfer. See FIGURE 5-18 for
an example of the status bar not displaying the seal icon.
Message bar
Status bar displaying the seal icon
Message bar
Status bar displaying the seal icon with a strikethrough
Fusion4 MSC-L
Installation & Operation Manual
LAD icon
Lock icon
TAS icon
Seal icon
(without strikethrough)
LAD icon
Lock icon
TAS icon
Seal icon
(with strikethrough)
5 - 23