Honeywell Fusion4 MSC-L Installation & Operation Manual page 464

5 - 276
Operation - Calibration
9. On the Calibration . Stream n . Wizard 5/6 screen, select
the IR controller or LAD, to accept the new meter factor and view the
calibration details.
The Calibration . Stream n . Wizard 6/6 screen appears, which
displays the calibration details.
A new calibration record is created and stored in the system. Each
calibration is saved in a non-volatile memory, with date, time, old and
new values.
<ESC>
NOTE: Select
Fusion4 MSC-L
Installation & Operation Manual
to restore the old meter factor.
<OK>
Part No.: 4418309_Rev09
Honeywell
on