Honeywell Fusion4 MSC-L Installation & Operation Manual page 443

FIGURE 5-36
Part No.: 4418309_Rev09
Honeywell
Operation - Calibration
5.18.2 Calibration Menu Choice
1. On the Main Menu screen, select the Calibration icon to perform
the calibration process.
Calibration icon
2. On the Calibration screen, select either
<Manual>
or the
<Wizard>
 In the
by comparing the measured volume with the device dispensed
volume.
 In the
factor.
The default meter factor for the
<Manual>
calibration method is 1. The range which can be specified
for the meter factor is between 0.5 and 1.5.
Fusion4 MSC-L
Installation & Operation Manual
calibration method.
calibration method, the meter factor is calculated
<Manual>
calibration method, you must enter the meter
<Wizard>
calibration method
<Wizard>
calibration method and the
5 - 255