Honeywell Fusion4 MSC-L Installation & Operation Manual page 252

5 - 64
Operation - Dual Bay Loading Application Overview
5.10.4 Authorization Modes supported for Dual Bay Loading
The following modes of authorization are supported for dual bay
loading:
 Two card readers - a card reader for each bay
 A common card reader for both the bays
 A PIN per user entered using the MSC-L keyboard
5.10.5 Dual Bay Configuration
The following section describes the configurations required for dual bay
loading.
To configure dual bay, perform the following:
1. On the System Configuration. General screen, select <Settings>.
2. On the System Configuration. General. Settings screen, select Bay
type (reboot required).
For more information on the entities, refer to chapter 5.8.1.1.5 "System
Config . Device . Settings".
The following screen appears.
Fusion4 MSC-L
Installation & Operation Manual
Part No.: 4418309_Rev09
Honeywell