Honeywell Fusion4 MSC-L Installation & Operation Manual page 333

Entity
[Product name]
[Main product]
[Vapour return]
5.14.1.2 Stream Config . Stream n . I/O Bindings
Part No.: 4418309_Rev09
Honeywell
Operation - Stream Configuration
The Stream Config . Stream n . Identification screen appears with the
following entities.
Description
With this entity you can enter the name
of the wild stream product.
The Product name appears on the
running screens.
With this entity you can enable or
disable loading the main product.
With this entity you can enable or
disable vapour recovery.
NOTE: Due to memory considerations, the size of stream
name parameters for product and additive streams is
reduced to 12 in the current release. Any longer
names shall be truncated when a configuration
backed up from a prior release is installed.
On the Stream Config . Stream n screen, select
The new Flexible I/O Allocation architecture forms the basis of the
Fusion4 product family. The architecture is designed around the
common I/O building blocks that can be arranged in different
configurations to be used in the MSC-L.
I/O allocation can either be performed through the IR controller through
the infrared link or LAD connected to the MSC-L front connector.
To configure Input/Output entities
 On the Main Menu screen, select the Stream Configuration icon.
The Stream Configuration screen appears.
 On the Stream Configuration screen, select Product streams.
The Stream Config. - Stream Selection screen appears.
 On the Stream Config. - Stream Selection screen, select any one
of the stream or all the streams.
The Stream Config . Stream n screen appears.
 On the Stream Config . Stream n screen, select
<Inputs>
 Select
controller, Fusion4 LAD, or the integrated keyboard.
A specific entity, for example
can be selected and linked to a specific I/O function such as
(Digital Input AC1, number 1),
chanical Relay), and so on.
Fusion4 MSC-L
Installation & Operation Manual
Value range
A text string of maximum 12 characters
can be entered.
The default value is
<Enable>
<Disable>
<Enable>
<Disable>
<Outputs>
or and then select
[Pump feedback],
<DO EMR>
<Stream n>
.
(default)
(default)
<I/O binding>.
<I/O binding>.
<OK>
on the Fusion4 IR
[Pump demand], and so on
<DI AC 1>
(Digital Output Electrome-
5 - 145