Honeywell Fusion4 MSC-L Installation & Operation Manual page 432

5.17.8.2 Execute Tasks
5 - 244
Operation - Diagnostics
 Format all memory - Allows you to reset to the default configu-
ration settings and reset to the default calibration settings. For
example, K-factors and clear/remove logs.
1. On the Diagnostics . Device Tasks screen, select
The Diagnostics . Execute Task. Arm Selection screen appears.
<OK>
2. Select on the IR controller or LAD to select any one of the
stream or all the streams.
The Diagnostics . Arm n . Execute Tasks screen appears, which
simulates the following actions by Comms.
 Select recipe
 Start batch
Fusion4 MSC-L
Installation & Operation Manual
<Execute tasks>.
Part No.: 4418309_Rev09
Honeywell