Honeywell Fusion4 MSC-L Installation & Operation Manual page 322

5.13.1.8.1.1 Workflow Installation and Configuration settings for MSC-L 1010BJ and 1010RT Emula-
5 - 134
Operation - System Configuration
tion
To configure a MSC-L device to run Local and Remote loading, you
should install two workflows as given below:
1. 1010BJLocal.xml / 1010RTLocal.xml workflow to run in local mode.
2. 1010BJRemote.xml / 1010RTRemote.xml workflow to run in remote
mode.
Main Menu. Device. Workflow settings. Options. Workflow selection =
Default>
Install 1010BJLocal.xml / 1010RTLocal.xml
To Install 1010BJLocal.xml /
Transfer. Install configuration.
NOTE: After installation device reboot automatically.
Main Menu. Device. Workflow settings. Options. Workflow selection =
Custom>
Install 1010BJRemote.xml / 1010RTRemote.xml
To Install 1010BJRemote.xml /
Transfer. Install configuration.
1010RTRemote.xml>
NOTE: After installation device reboot automatically.
Main Menu. Device. Workflow settings. Options. Workflow selection =
Default>
Main Menu | Device | Workflow settings | Options | Workflow mode =
Remote>
Reboot the device manually, after the configuration settings are done.
Fusion4 MSC-L
Installation & Operation Manual
workflow.
1010RTLocal.xml:
<1010BJLocal.xml / 1010RTLocal.xml>
1010RTRemote.xml:
<1010BJRemote.xml /
Part No.: 4418309_Rev09
workflow.
Honeywell
<
<
<
<