Honeywell Fusion4 MSC-L Installation & Operation Manual page 482

FIGURE 5-44
5 - 294
Operation - LAD Functions
The LAD function screen appears, which displays the various LAD
functions and their activities.
LAD functions
5.21.2 Firmware Update
NOTE: Remove the
Honeywell\MSC-L\Generic\Firmware\
directory from previous upgrades before updating the
files.
To update the firmware using the LAD
1. Replace
Honeywell\MSC-L\Generic\Firmware\ directory.
 FM-HMI-FC-FPGA.bin
 FM-HMI-FC-IMG.bin
 FM-IN-OUT-APP.bin (optional)
 FM-ARM-FC-APP.bin
 FM-HMI-FC-APP.bin
The FM-IN-OUT-APP.bin file is only required if the CAN-IN-OUT-MSC
card is installed in the device.
2. Connect the LAD to the MSC-L and make sure that the SD card is
inserted in the LAD before connecting.
A green status light on LAD indicates that the SD card is inserted
correctly and a red status light indicates that the SD card is missing.
NOTE:
Update the firmware only when the device is not being used.

Fusion4 MSC-L
Installation & Operation Manual
old files that are
the following updated
available in
firmware files
Part No.: 4418309_Rev09
in the
Honeywell