Users; Additional Information; Environmental Conditions; Operation - Honeywell Fusion4 MSC-L Installation & Operation Manual

Table of Contents

Advertisement

WARNING! When the MSC-L is used in operating temperatures
WARNING! Any repairs or part replacements must be done by a
WARNING! At high ambient temperature, pay attention to the fact
Part No.: 4418309_Rev09
Honeywell
Safety - Safety Instructions for the MSC-L

2.2.1.3 Users

The mechanical and electrical installation must be performed only by
trained personnels with the knowledge of the requirements for
installation of explosion proof equipment in hazardous areas.
The entire installation procedure for the MSC-L must be implemented in
accordance with national, local, and company regulations.
The entire electrical installation may be performed in accordance with
the national requirements for electrical equipment to be installed in
hazardous areas.

2.2.1.4 Additional Information

For additional information about Honeywell Enraf's solutions, see the
back cover of this manual to contact Honeywell Enraf or its
representative.

2.2.1.5 Environmental Conditions

The environmental conditions regarding the permissible operating
temperature for the MSC-L is -40 °C to +65 °C (-40 °F to +149 °F).
above 40 °C the enclosure is hot when it is touched.

2.2.2 Operation

After commissioning, the MSC-L can be used for its flow controller or a
load computer for a multi stream product.

2.2.3 Maintenance and Troubleshooting

In the unlikely event of a malfunction, only a qualified service technician,
trained by Honeywell Enraf, and with the knowledge of safety
regulations for working in hazardous areas, must be allowed to service,
maintain, assemble, and dismantle the MSC-L.
Honeywell Enraf trained service technician.

2.2.4 Personal Safety

National, local and company regulations regarding personal safety must
be followed.
Consider the weight of the MSC-L when moving, installing, or
decommisioning.
that the accessible parts on the outside of the MSC-L
can be hot.
Fusion4 MSC-L
Installation & Operation Manual
2 - 3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enraf fusion4 msc-l

Table of Contents