Honeywell Fusion4 MSC-L Installation & Operation Manual page 314

5.13.1.5.5 System Config . Alarms . Fixed
Entity
[Power supply fault]
[Loss of TAS Comms.]
5.13.1.6 System Config . Device . Authorization
5 - 126
Operation - System Configuration
1. On the System Config . Device . Alarms screen, select <Fixed>.
The System Config . Alarms . Fixed screen appears.
2. On this screen the following entity is displayed.
Description
With this entity you can configure an
alarm that is triggered when there is a
power supply fault.
With this entity you can configure an
alarm that is triggered when there is a
loss in TAS Comms.
On the System Config . Device screen, select <Authorization>.

Fusion4 MSC-L
Installation & Operation Manual
Value range
<Disabled>
(default)
<Display>
<Display shutdown>
<Display pause>
<Disabled>
(default)
<Display>
<Display shutdown>
<Display pause>
Part No.: 4418309_Rev09
Honeywell