Honeywell Fusion4 MSC-L Installation & Operation Manual page 303

5.13.1.4.3 RTD
Entity
[RTD serial #]
[Temperature offset]
[RTD wiring]
Part No.: 4418309_Rev09
Honeywell
Operation - System Configuration
On the System Config . Device . I/O settings screen, select an
available RTD. The following entities are displayed on the System
Config . RTD-n screen.
Description
With this entity you can enter the serial
number of the connected PT100
temperature probe.
With this entity you can insert a
certified thermometer near the RTD
and adjust the MSC-L to read the same
temperature. The temperature offset is
for calibration of the RTD.
With this entity you can set the wiring
configuration of the RTD.
Fusion4 MSC-L
Installation & Operation Manual
Value range
Alphanumeric string of maximum 8
characters.
0.00 ..°C
default =
<3 wire>
<4 wire>
(default)
<Unknown>
5 - 115