Honeywell Fusion4 MSC-L Installation & Operation Manual page 324

Entity
[Lamp status idle]
[Lamp status authorization]
[Lamp state wait ack]
5 - 136
Operation - System Configuration
The System Config . Device . RIT Panel
2. On the System Config . Device . RIT Panel screen, select each
entity to configure the MSC-L.
Description
With this entity you can select the lamp
status on the Remote Interaction
Terminal, when idle.
With this entity you can select the lamp
status on the Remote Interaction
Terminal during authorisation.
With this entity you can select the lamp
status on the Remote Interaction
Terminal, when waiting for
acknowledgement.
Fusion4 MSC-L
Installation & Operation Manual
appears.
screen
Value range
<All off>
<Red steady>
(default)
<Red flashing>
<Amber steady>
<Amber flashing>
<Green steady>
<Green flashing>
<All off>
<Red steady>
<Red flashing>
<Amber steady>
(default)
<Amber flashing>
<Green steady>
<Green flashing>
<All off>
<Red steady>
<Red flashing>
<Amber steady>
<Amber flashing>
(default)
<Green steady>
<Green flashing>
Part No.: 4418309_Rev09
Honeywell