Honeywell Fusion4 MSC-L Installation & Operation Manual page 288

5.13.1.1.3.1 System Config . Display . General Settings
Entity
[Display brightness]
[Auto brightness adjustment]
[Session timeout value]
5 - 100
Operation - System Configuration
The System Config . General . Display screen appears.
2. On the System Config . General . Display screen, select each
entity to configure the display for the MSC-L.
On the System Config . General . Display screen, select
settings>. The following entities are displayed.
Description
With this entity you can enter the
brightness of the display. The
brightness is controlled by the backlight
of the display.
With this entity you can enable the auto
brightness feature. When enabled, the
ambient light sensor on the HMI senses
the ambient light and automatically
adjusts the brightness of the display.
With this entity you can enter the time
in seconds between the last key
pressed on the IR Controller and the
moment the display switches back to
one of the running screens.
Fusion4 MSC-L
Installation & Operation Manual
Value range
<0> % <100> %
(low) ...
<75> %
(default = )
<Enable>
(default)
<Disable>
<10> s <600> s
...
<300> s
(default = )
Part No.: 4418309_Rev09
<General
(high)
Honeywell