Honeywell Fusion4 MSC-L Installation & Operation Manual page 258

5 - 70
Operation - Dual Bay Loading Application Overview
The following table describes the various arm statuses based on the
values configured for Bay 1 in position is Active and Bay 1 in position is
Active parameters.
Bay 1 in
position
Active
Not Active
Active
Not Active
18. On the Diagnostics screen, select <Accumulated totals>. The Diag-
nostics. Accumulated Totals screen appears.
Fusion4 MSC-L
Installation & Operation Manual
Bay 2 in
Arm Status
position
Active This scenario cannot occur.
An alarm "Swing arm invalid position" is
displayed
Active Loading can begin at Bay 2
Not Active Loading can begin at Bay 1
Not Active The loading arm is parked or in transition.
Part No.: 4418309_Rev09
Honeywell